Olympus LS-20M Detailed Instructions page 18

Notes
• Be sure to turn off the power of the recorder
before replacing the battery. Unloading the
battery while the recorder is in use may cause
a malfunction such as corrupting the file, etc. If
you take out the battery while operating, you
will lose your currently recorded file because the
file header will not be able to close.
1
• If it takes longer than 15 minutes to replace the
dead battery or if you take the battery in and
out repeatedly at short intervals, you may have
to reset the time when you have loaded fresh
battery.
• Remove the battery if you are not going to use
the recorder for an extended period of time.
• When replacing rechargeable battery, be sure
to use lithium ion battery (LI-42B) specified
by Olympus. The use of other manufacturers'
products can damage the recorder and should
be avoided.
• Lithium ion battery is self discharging. After
unpacking this product, charge the supplied
lithium ion battery before using the recorder for
the first time.
EN
18
Battery indicator
The battery indicator on the sub LCD changes
as the battery lose power.
• When [æ] appears on the sub LCD, charging
the battery as soon as possible. When the
battery is too weak, [s] and [Battery Low]
will appear on the display and the recorder
will shut down.
• While charging, the battery indicator
constantly changes and does not show the
actual amount of power remaining.
Power supply