System Configuration Menu - Olivetti d-Color P20W User Manual

S
YSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you
prefer to work.
I
TEMS
POW SAVE TIME 5
CLRABLE
WARNING
MANUAL
TIMEOUT
WAIT TIMEOUT
LOW TONER
JAM RECOVERY
ERROR REPORT ON
S
ETTINGS
15
30
60
240
ON
JOB
OFF
30
60
5~40~300
CONTINUE
STOP
ON
OFF
OFF
Menu functions> 56
E
XPLANATION
Adjusts the idling time before the
printer automatically switches into
power saving mode. In this mode
power consumption is reduced to a
low level required to just keep the
printer operating and ready to
receive data. When a job is sent the
printer will require a warm-up time
of up to 1 minute before printing can
begin.
When ON, non-critical warnings,
such as requests for a different
paper size, can be cleared by
ON LINE
pressing the
When set to JOB, they are cleared
when the print job resumes.
Specifies how many seconds the
printer will wait for paper to be fed
before cancelling the job.
Specifies how many seconds the
printer will wait when received data
pauses before forcing a page eject.
In PostScript Emulation mode the
job will be cancelled if timeout
occurs.
Specifies whether the printer should
continue printing even after a low
toner condition is detected.
Specifies whether the printer should
perform jam recovery after a paper
jam has occurred. If ON, the printer
will attempt to print again any pages
lost due to a paper jam once the jam
has been cleared.
If ON, the printer will print error
details when a PostScript Emulation
error occurs.
button.