Table of Contents
Advertisement
1.5.3 Cut-Sheet Paper (Validation/Stub)
1.5.3.1 Loading the Cut-Sheet Paper (Validation/Stub)
Use the paper that matches the specifications.
Note:
The printer must be turned on before loading the paper.
1.
Turn on the printer.
2.
With the right edge of the paper positioned at the " " mark on the Cover Top, insert the paper.
o425_48.jpg
Note:
To feed paper along the long edge, remove the Piece (1) on the left side of the printer cover and set the paper.
o425_72.jpg
1
Developer's Guide: English
|
25
Advertisement
Table of Contents
