Led Function - Oki POS 425D Developer's Manual

2.1.2 LED Function

No. LED
1 POWER
2 LED 1
(ERROR)
3 LED2
(Status)
4 LED3/
LED4
(Mode)
When "Cover Open Alarm" is set to No in Menu, Cover Open Alarm is disabled (printing does not stop).
* Media Does Not Match Alarm (1) is detected by monitoring the option tractor lever. Media Does Not
Match Alarm (2) is detected by the Validation sensor monitoring (media manually inserted into the
validation opening).
|
OKIPOS 425D
34
ON
Green Powered On
Red Recoverable Alarms
*Slip Feed/Eject
Alarm
*Auto Loading Alarm
*Auto Parking Alarm
*Media Mismatch
Alarm (1)
*Media Mismatch
Alarm (2)
*Cover Open Alarm
(Only OKI
standard type)
Orange Paper is not fed
(In sheet-insertion
wait state)
Orange In Slip Mode
In Receipt + Journal
Green Mode
A25004.doc
OFF
Powered off -
Normal state *Unrecoverable Alarms
(blinking pattern indicates
alarm type)
*See the table in section 4.1
*SP Thermal alarm
(LED2 blinks concurrently)
*LF Thermal Alarm
Paper has *In sheet-extraction wait
been fed state
(in print ready *SP Thermal Alarm
state) (LED1 blinks concurrently)
In Tractor In Validation
Mode mode
*Quick
blinking
In Receipt
Mode
* Quick
blinking
Blinking
In MICR
Mode
*Slow
blinking
In Journal
Mode
* Slow
blinking