Before You Start; Selecting Pserver Or Rprinter/Nprinter Mode - Oki OKILAN 6200E User Manual

issue, since it is possible to make a global change
in the Directory Service or PCONSOLE utility so
that banner pages are created in PostScript, and
not ASCII text.

Before You Start

• You should be familiar with network administration
as well as the physical setup and operation of your
network.
• Write down the serial number and the Ethernet or
Token-Ring address of your Network Print Server.
This information is on the Configuration sheet; to
print it, press and hold the Test button on the Net-
work Print Server below the Ethernet connector.
• If necessary, install the Network Print Server hard-
ware and connect the cabling—see your printer
User's Guide. Install the OkiNet Utility for Net-
Ware—see Install Software Utilities.
Selecting PServer or RPrinter/NPrinter
Mode
Your Network Print Server supports both PServer and
NPrinter mode. There are several factors to consider
when choosing which mode to use.
In PServer mode, the Network Print Server operates
as the print server. It services specified queues on the
network. In RPrinter mode, the NetWare Print Server
NLM or EXE is in control.
Novell NetWare
OkiLAN 6200e Plus User's Guide
43