Oki OKILAN 6200E User Manual page 157

2. The name of the Network Print Server
(OKIPRINTER) and the IP address you wish to
assign are in the "/etc/hosts" file of the SCO
machine.
3. The IP address of the Network Print Server has
been assigned and you are able to telnet to
OKIPRINTER successfully.
Procedure
1. Login to the SCO machine as root.
2. Install Remote Line Printing or verify that it is run-
ning by typing mkdev rlp at the UNIX prompt. It will
respond by asking if you want to install or remove
remote line printing. Choose Install even if remote
line printing may already be installed.
3. If remote line printing is already installed, mkdev
rlp will respond with the message Remote line
printing working directory already exists. Do you
wish to continue installing the remote line printing
system? Answer no to this prompt and skip to Step
6. If remote line printing was not installed, mkdev
rlp will respond with messages detailing files and
directories that it is creating.
4. The command mkdev rlp asks if you wish to
change the printer description file "/etc/printcap".
Choose no for this prompt. It responds saying Run
'/etc/rlpconf' to change the remote printer descrip-
tion file. Do NOT run "/etc/rlpconf". We will perform
the functions of "/etc/rlpconf" manually.
5. The next prompt is Do you want to start remote
daemon now? Answer yes to this prompt. This
should bring you back to the UNIX prompt.
TCP/IP
OkiLAN 6200e Plus User's Guide
157