Oki OKILAN 6200E User Manual page 123

4. Specify Subnet Mask For Your
Network
5. Identify Default Gateway IP Address
6. Configure Port
7. TCP Connection Configuration
8. Download New Firmware
9. Restore to Factory Defaults
To select an option above, type its
number and press Enter.
To quit, press Enter.
************************************************************
Showing Network/Printer Information (Option 1)
This option displays current network and printer infor-
mation.
Changing the Password (Option 2)
This option allows you to change the password
required for access to this utility. We recommend that
you change your password periodically, especially if
security may have been compromised. Type a pass-
word (5-24 characters long). The characters you type
will not appear on the screen. When you are done typ-
ing, press Enter. You will be asked to enter your pass-
word again. This allows you to verify your password
was typed correctly.
You must save your changes when you exit the utility
for the new password to take effect.
TCP/IP
OkiLAN 6200e Plus User's Guide
123