Chapter 1: Introduction; Overview; Before You Start - Oki POCKET PRINT 6010E User Manual

Chapter 1: Introduction

Overview

This section contains instructions and information on
how to configure your OkiLAN 6010e in the NetWare
environment.
There are two environments in which to configure the
OkiLAN 6010e:
Bindery (NetWare 3.x)
NetWare Directory Services (NDS)—for
NetWare versions 4.1 and later.

Before You Start

You should be familiar with network admin-
istration as well as the physical setup and
operation of your network.
Write down the serial number and the
Ethernet address of your OkiLAN 6010e.
You will find these numbers on the OkiLAN
6010e enclosure.
Install the OkiLAN 6010e hardware and
connect the cabling—see Section I. Instruc-
tions for hardware installation are found in
Section I of this manual.
Install the OkiNet Utility for NetWare—see
Section I.
OKI OkiLAN 6010e User's Guide
Section III - NetWare
III - 5