Oki OKILAN 6200E User Manual page 149

• lj4 - The local queue name on the HP-UX system
to which print jobs will be directed. The print jobs
are destined for a printer attached to the Network
Print Server.
• OKIPRINTER - The host name of the remote sys-
tem which is the Network Print Server. For exam-
ple, to telnet to the Network Print Server and
invoke the Network Print Server Configuration util-
ity, you would type telnet OKIPRINTER. A host
name is not required for the Network Print Server,
the IP Address may be used.
• yourqueuename - This is the name of the queue
on the Network Print Server and must end with 1,
2, 3 or 4, depending on the port selected to service
the print jobs. If FF, LF or NF are the last two letters
of the queue name, the job will be converted
accordingly. For more information, see Remote
Print Queue Names.
Prerequisites
Before you proceed, the following prerequisites must
be met. Most of the time steps 2 through 5 are already
configured since the HP-UX system is on a TCP/IP
network. Do not perform steps 2 through 5 unless
the installation procedure fails!
1. The name OKIPRINTER and the IP address
assigned to the Network Print Server are in the "/
etc/hosts" file on the HP-UX system.
2. Make sure the rlp process is not running by typing
at the UNIX prompt: ps -e | grep rlp If rlp is not
running, you will not see any output after executing
TCP/IP
OkiLAN 6200e Plus User's Guide
149