Oki OKILAN 6200E User Manual page 90

Queue Names should end with the number 1, 2, 3 or
4. If a number is not specified, the Network Print
Server will use printer port 1.
The Network Print Server is designed to handle many
different types of printers and print data. Typically you
will select the printer type for your printer in Telnet
under the Configure Port option. However, if you are
connecting to an ASCII printer, you may wish to use
the Network Print Server to format the print data for
your printer.
The Network Print Server will parse the remote queue
name and search for certain characters at the end
which tell how to convert an ASCII print job. The print
server uses FF, LF and NF as ASCII conversion speci-
fiers and uses the last number as an output port. The
FF, LF and NF specifiers must be the last letters in the
queue name.
Example:
C9500FF, SalesColorLaserNF,
ChemDeptLF2
FF
Use the FF suffix at the end of the Remote Print
Queue Name, before the port number.
Example:
queueFF2
If the last character in the print job is not a form feed,
the Network Print Server appends a form feed. This
form feed prompts the printer to print any partial page
at the end of the job.
TCP/IP
OkiLAN 6200e Plus User's Guide
90