Chapter 4: Additional Utility Features; Chapter 4 Additional Utility Features; Overview; Deleting A Local Port - Oki OKILAN 6100E+ User Manual

Section 6 - Chapter 4 - Additional Utility Features
Chapter 4
Additional Utility Features

Overview

You can run the OkiNet for OS/2 utility at any time to
access the following optional features:

• Deleting a Local Port

• Configuring a Print Server

Deleting a Local Port
The delete command allows you to delete a local port
that has been previously added.
1. Verify the local port is not attached to an OS/2
printer queue. The local port cannot be deleted if it is
attached to an OS/2 printer queue.
2. Login to the server with administrator privileges and
run OkiNet for OS/2.
3. Click OK.
4. From the Configure menu, select Delete Local Port.
5. From the Delete Local Port screen, use the scroll
arrows to select and highlight the local port you wish
to delete.
6. Select Delete. The Cancel button exits the screen
without deleting the port.
To add additional local ports, follow the Running
OkiNet for OS/2 instructions on page VI-8.
Configuring a Print Server
OkiNet for OS/2 allows you to change the default
configuration of the OkiLAN 6100e+. These
configuration settings are retained when the OkiLAN
6100e+ is powered off.
1. Login to the server with administrator privileges and
run OkiNet for OS/2.
2. Click OK.
OKI OkiLAN 6100e+ User's Guide VI - 13