Running Okinet For Tcp/Ip; Configuring The Okilan 6100E+ Using Okinet For Tcp/Ip - Oki OKILAN 6100E+ User Manual

Section 4 - Chapter 4 - OkiNet for TCP/IP

Running OkiNet for TCP/IP

To run the utility, double-click on the OkiNet icon. The
main OkiNet for TCP/IP screen will display.
By default, the All Print Servers view is selected and all
print servers attached to the subnet of the network from
which the OkiNet utility is running are listed.
Configuring the OkiLAN 6100e+ Using
OkiNet for TCP/IP
The following steps outline how to configure an
OkiLAN 6100e+. To change settings of a previously
configured OkiLAN 6100e+, follow the same procedure
but skip Step 3, as no prompt will appear.
1. Select the OkiLAN 6100e+ you wish to configure.
2. Select Configuration from the Print Server menu or
select the Configuration icon on the toolbar.
3. When prompted, enter the IP Address of the
OkiLAN 6100e+.
4. Set the appropriate configuration by choosing the
applicable file folder tabs.
The following settings are configurable:
• TCP/IP
• NetWare
• NetWare Port
• NetWare Queues
• VINES
IV - 24 OKI OkiLAN 6100e+ User's Guide
• Ethertalk
• Output Port
• SNMP
• Protocols
• SNMP Traps