Loading And Printing On Rolls - Canon imageprograf IPF785 User Manual

Loading and Printing on Rolls

• The Power Lamp and Message Lamp are not lit (even once), and nothing appears on the
Display Screen
Make sure the printer is plugged in correctly. Check the connection at the plug and electrical outlet.
• No paper is loaded
Load paper. (See "Loading and Printing on Rolls.")
Sheets.")
Turning the printer off
• Never disconnect the printer's power supply or unplug it during a print job. This may damage the printer.
Important
1
Make sure no print jobs are in progress.
If the Message Lamp is flashing, check the message on the Dis-
play Screen and take action as necessary. (See "Error Messag-
es.")
P.598
➔
If the Data Lamp is flashing, the printer is receiving a print job.
Turn off the printer only after printing is finished.
2
Hold down the Power button for more than a second.
After "Shut Down.. Please Wait.." is shown on the Display
Screen, the printer shuts off.
Loading and Printing on Rolls
Loading and Printing on Rolls
18
These are the basic steps for loading and printing on rolls.
Follow these steps to load and print on rolls.
• For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide. (See "Paper
Sizes.")
Note
• If you prefer to wait for the ink to dry after printing and simply eject the document, you can deactivate automatic
cutting and cut the paper manually. (See "Specifying the Cutting Method for Rolls.")
P.21
➔
(See "Types of Paper.")
P.328
➔
(See "Loading and Printing on
P.18
➔
P.328
➔
iPF785
P.351
➔
User's Guide