Other Problems; The Ink Tank Cover Has Become Detached From The Printer; The Printer Does Not Go On; The Printer Takes Time To Start Up - Canon imageprograf IPF785 User Manual

iPF785

Other problems

Other problems

The Ink Tank Cover has become detached from the printer ....................................................................... 593

The printer does not go on ......................................................................................................................................... 593

The printer takes time to start up ............................................................................................................................ 593

If the Printer Makes a Strange Sound .................................................................................................................... 594
Messages advising to check the maintenance cartridge are not cleared .............................................. 594
The printer consumes a lot of ink ............................................................................................................................ 594
Ink Level Detection ......................................................................................................................................................... 594
The Ink Tank Cover has become detached from the printer
The Ink Tank Cover has become detached from the printer
The Ink Tank Cover became detached from the printer because too much
force was applied to the Ink Tank Cover.
The printer does not go on
The printer does not go on
Cause
The printer is unplugged.
The specified voltage is not supplied.
The printer takes time to start up
The printer takes time to start up
The printer may have shut down incorrectly last time. This may hap-
pen after power outages or if the printer is unplugged before it is
turned off.
In this case, the next time power is restored, the printer's hard disk is
checked, and startup may take some time.
User's Guide
Cause
Plug the power cord into the outlet, and then turn on the printer.
Check the voltage of the outlet and breaker.
(See "Specifications.")
Cause
The Ink Tank Cover has become detached from the printer
Attach the Ink Tank Cover to the printer.
(See "Attach the Ink Tank Cover to the printer.")
Corrective Action
P.620
➔
Please wait a while, because it may take several minutes to
finish checking the hard disk.
If an error message is displayed after the hard disk check,
follow the instructions indicated to resolve the problem.
Corrective Action
Corrective Action
P.542
➔
593