Canon imageprograf IPF785 User Manual page 425

iPF785
System
Nozzle Check
Setup
Use USB
Use Ethernet
Use RemoteUI
Reset PaprSetngs
Erase High Speed
HDD
Data
Secure High Spd.
Secure
Output Print
Method
Print (Auto Del)
Save: Box XX
Print After Recv
Save: Common Box
Show Job Log
Prep.MovePrinter
Admin. Change Password
Menu
User's Guide
Setting Item Description, Instructions
In Frequency, specify the timing for automatic checks of
nozzle clogging. Choose Standard to have the printer ad-
just the timing for checks based on the frequency of noz-
zle use. Choose 1 page to check once per page. Choose
10 pages to check once per 10 pages. Choose Off to not
execute check.
If On is selected in Warning, a warning may be displayed
on the Control Panel depending on the result of the nozzle
check.
When Off is selected, the device can no longer be ac-
cessed via USB.
When Off is selected, the device can no longer be ac-
cessed via Ethernet.
Choosing Off prohibits access from RemoteUI. Settings
can only be configured from the control panel.
Restores settings that you have changed with Media Con-
figuration Tool to the default values.
Erases file management data for print job data stored on
the printer's hard disk. (See "Erasing Data on the Printer's
Hard Disk.")
P.442
➔
Overwrites the entire hard disk with random data. (See
"Erasing Data on the Printer's Hard Disk.")
Overwrites the entire hard disk with 00, FF, and random
data (one time each). Verification is performed to check if
the data was correctly written. (See "Erasing Data on the
Printer's Hard Disk.")
P.442
➔
Select the printing method for jobs received from software
other than the printer driver. When using the printer driver,
configure settings on the printer.
To print as usual, select Print. Selecting Print (Auto Del)
will print the job and then delete the data from the printer's
hard disk. Selecting Save: Box 01 will only save the print
job in the box, without printing it.
A setting for jobs received from software other than the
printer driver. When using the printer driver, configure set-
tings on the printer. Select On to print the job after it has
been saved.
Select Off to print without saving jobs in the common box.
Selecting Off prevents display of the log in Job Menu >
Job Log. Additionally, the log is not printed if you choose
Job Menu > Print Job Log. Note that because job logs
are not collected, the Status Monitor accounting functions
will not work correctly.
When transferring the printer to another location, choose
the level of transfer and follow the instructions on the
screen. (See "Preparing to Transfer the Print-
er.")
P.561
➔
Not displayed during a warning message that the remain-
ing Maintenance Cartridge capacity is low.
The password that can be entered is a number from 0 to
9999999.
The restriction states and main items are shown below.
For more specific information on restricted items, see
"Menu Structure."
P.410
➔
• Viewing and configuration by administrators only
Change Password
Init.Admin.Pswd
Menu Settings
P.442
➔
425