Entering And Exiting Menu Mode; Resetting The Menu To The Factory Defaults; Printing The Menu Settings - Oki Microline 490 User Manual

Entering and Exiting Menu Mode

To enter or exit the Menu Mode, hold
.
SEL

Resetting the Menu to the Factory Defaults

Note: Please print the current Menu Mode settings before you
reset or change them. This is the only way to have a
record of the settings.
To reset the Menu to the standard settings (factory defaults):
1 Turn the printer off.
2 Press + while turning the printer on.
SEL LF
while pressing
SHIFT

Printing the Menu Settings

Printing the Current Menu Settings
1 Make sure paper is loaded in the printer.
2 Press and hold , then press
SHIFT
Mode.
3 Press ( key).
PRINT PARK
Printing All Menu Settings
To print out a listing of the settings for all menu items,
regardless of the emulation selected or the accessories installed:
1 Make sure paper is loaded in the printer.
2 Press and hold , then press
SHIFT
Mode.
3 Press and hold , then press
SHIFT
to enter the Menu
SEL
to enter the Menu
SEL
.
PRINT QUALITY
27
Menu Mode