Hexadecimal Dump Mode; Emulations; Printer Drivers - Oki Microline 490 User Manual

Hexadecimal Dump Mode

When the printer is placed in the Hexadecimal Dump Mode, all
data received, including text and printer commands, is printed
in both hexadecimal and ASCII format.
For example, the following line of BASIC code
would print like this:
Note: In the ASCII format, all non-printable characters will be
represented by a period.
To engage the Hexadecimal Dump Mode:
1 Make sure paper is loaded.
2 Turn off the printer.
3 Hold the and
SEL FF/LOAD
turning on the printer.
To exit the Hexadecimal Dump Mode:
• Press the key
SEL
or
• Turn the printer off, then on again.
keys for several seconds while

Emulations

The factory default emulation for your printer is Epson
If you wish to change to one of the IBM emulations, see
"Changing Emulations" in Chapter 3.

Printer Drivers

The Oki driver for your printer is provided on the CD included
with the printer. You can either load the Oki driver or select one
of the compatible drivers listed below in your software
application.
® LQ.
89
Installation