Printer Reset; Emulations - Oki Microline 490 User Manual

Printer Reset

Clearing some error conditions requires that you reset
(reinitialize) the printer. To do this:
1 Press and release (1) to take the printer off-line.
SEL
The light goes out.
SEL
2 Press and hold (2), then press
SHIFT
.
PITCH
Important!
Pressing +
SHIFT RESET
affect any menu settings and does not reset the printer to the
factory defaults. For information on resetting the printer to
the factory defaults, see "Resetting the Menu to the Factory
Defaults" later in this chapter.
/
RESET CHARACTER
reinitializes the printer, but does not

Emulations

®
• Epson LQ — factory setting
• IBM ® Proprinter
• IBM ® AGM
Changing Emulations
1 Make sure paper is loaded.
2 Press and hold (2), then press
SHIFT
3 Press (3).
LF
The following line prints:
4 Press (4) repeatedly until the emulation you wish to
TEAR
select prints in the right-hand column.
5 Press and hold (2), then press
SHIFT
setting and exit the Menu Mode.
(1).
SEL
(1) to save your
SEL
25
Using Your Printer