Oki Microline 490 User Manual page 32

Menu Settings Table (Continued)
Group Item
Setup (cont.) Operator Panel Function
Reset Inhibit
Print Suppress Effective
Auto LF
Auto CR*
CSF Bin Select†
SI Select Pitch (10 cpi)*
SI Select Pitch (12 cpi)*
Time Out Print
Auto Select
Graphics Speed
Centering Position
CSF Type
Power Saving
Power Save Time
* Appears only when the IBM emulation is selected.
† Appears only when optional Cut Sheet Feeder is installed.
32
Microline 490/491 User's Guide
Settings (Defaults are set in bold italic)
Full Operation, Limited Operation
No, Yes
No, Yes
No, Yes
No, Yes
Bin 1, Bin 2
15 cpi, 17.1 cpi
12 cpi, 20 cpi
Valid, Invalid
No, Yes
Low, High
DEFAULT, MODE 1, MODE 2
Wide, Narrow
Enable, Disable
5 min, 10 min, 15 min, 30 min, 60 min