Ribbon Protector - Oki ML520 Service Manual
Oki dot matrix printers service guide ml520, ml521
Hide thumbs
Also See for ML520:
- Quick start (4 pages) ,
- Specifications (2 pages) ,
- User manual (226 pages)
Table of Contents
Advertisement
Page: 72
Service Guide ML520/521
Chapter 3 Maintenance & Disassembly
3.2.03 Ribbon Protector
CAUTION
You MUST use a straight slot screwdriver to release the ribbon protector. If you attempt to lift the protector
without releasing the tabs, the protector will break.
.
1.
Perform these procedures: 3.2.01 , and 3.2.02
2. Open the pull-up roller cover (1).
3. Use a straight-slot screwdriver to release the extensions (2) from the carriage frame set (3).
4. Lift the ribbon protector (4) straight up and remove it.
P/N 53562801 Protector: Ribbon RSPL Both B.2.07
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Advertisement
Table of Contents
Troubleshooting
