Automatic Paper Load - Oki ML520 Service Manual
Oki dot matrix printers service guide ml520, ml521
Hide thumbs
Also See for ML520:
- Quick start (4 pages) ,
- Specifications (2 pages) ,
- User manual (226 pages)
Table of Contents
Advertisement
Page: 63
Service Guide ML520/521
Chapter 2 Principles of Operation
2.2.08 Automatic Paper Load
The Microline 520/521 printers will automatically detect cut sheet paper and feed the paper to the Top of
Form (TOF) position.
Cut Sheet Paper
Set the change lever to the TOP FEED position.
NOTE:
When the change lever is in the TOP FEED position, the cut sheet detection lever contacts the cut sheet
detection switch (BASW), which is located on the main control board.
Insert the sheet of paper between the platen and the paper chute.
Once paper is detected at the paper end sensor and the amount of time selected on the Wait Time setting
of the menu has lapsed, the line feed motor will feed the paper until the leading edge of the paper reaches
the top of form position.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Advertisement
Table of Contents
Troubleshooting
