Oki ML520 Service Manual page 154

Paper Out Override
Print Registration
Operator Panel Function
Reset Inhibit
Print Suppress Effective
Auto LF
Auto CR * * * *
CSF Bin Select * * *
Print DEL Code * *
SI Select Pitch (10 CPI) * *
* *
SI Select Pitch (12 CPI) * *
* *
Time Out Print
Auto Select
Printhead Gap Adjust
* Model 521 only
* * Appears only when Microline emulation is selected
* * * Appears only when optional Cut Sheet Feeder is installed
* * * * Appears only when IBM Proprinter emulation is selected
* * * * * Appears only when Epson LQ emulation is selected
* * * * * * Appears only when optional Serial Interface is installed
* * * * * * * Appears only when optional Roll Paper Stand is installed
Factory default settings are printed in Bold Italic .
No Yes
O 0.05 mm Left 0.10 mm Left 0.15 mm Left 0.20
mm Left 0.25 mm Left 0.25 mm Right 0.20 mm
Right 0.15 mm Right 0.10 mm Right 0.05 mm
Right
Full Operation Limited Operation
No Yes
Yes No
No Yes
No Yes
Bin 1 Bin 2
No Yes
17.1 15 cpi
20 12 cpi
Valid Invalid
No Yes
0 - 1 + 1