Acl - Planet Networking & Communication FRT-415N User Manual

5.6.4 ACL

5.6.4.1 ACL
Choose Service > ACL and the page shown in the following figure appears. On this page, you can permit the
data packets from LAN or WAN to access the router. You can configure the IP address for Access Control List
(ACL). If ACL is enabled, only the effective IP address in the ACL can access the router.
If you select Enable in ACL capability, ensure that your host IP address is in ACL list
before it takes effect.
The following table describes the parameters:
Field
Direction Select
LAN ACL Switch
IP Address
Figure 5-64 ACL
Description
Select the router interface. You can select LAN or WAN. In this
example, LAN is selected.
Select it to enable or disable ACL function.
Enter the IP address of the specified interface. Only the IP address that
is in the same network segment with the IP address of the specified
interface can access the router.
86
User Manual of FRT-415N