User Manual of FRT-415N
4.2 Configuring with Web Browser
It would be better to change the administrator password to safeguard the security of your network. To
configure the router, open your browser, type "http: //192.168.1.1" into the address bar and click "Go" to get
to the login page.
Save this address in your Favorites for future reference.
Figure 4-9 Login the Router
At the User Name and Password prompt, type your proper user name and password to login. The default user
.
name and password are both "admin. You can change these later if you wish. Click "OK"
Figure 4-10 Login Window
If the user name and password are correct, you will log in to Fiber Router successfully and see the status page.
Now you can configure the Fiber Router for your needs.
25