Planet Networking & Communication FRT-415N User Manual page 41

The following table describes the parameters:
Field
IP Address
MAC Address
Expiry
Refresh
Close
Click Set Vendor Class IP Range on the DHCP Mode page and the page as shown in the following figure
appears. On this page, you can configure the IP address range based on the device type.
 None
In the DHCP Mode field, choose None and the page shown in the following figure appears.
Description
It displays the IP address assigned to the DHCP client from the router.
It displays the MAC address of the DHCP client. Each Ethernet device
has a unique MAC address. The MAC address is assigned at the
factory and it consists of six pairs of hexadecimal character, for
example, A8-F7-E0-00-11-22.
It displays the lease time. The lease time determines the period that the
host retains the assigned IP addresses before the IP addresses
change.
Click it to refresh this page.
Click it to close this page.
Figure 5-20 Device IP Range Table
41
User Manual of FRT-415N