Delete Selected
Click Show Routes and the page shown in the following figure appears. You can view the information of the
clients connected to the fiber router.
5.4.1.2 IPv6 Static Route
Click IPv6 Static Route in the left pane and the page shown in the following figure appears. This page is used to
configure the routing information. You can add or delete IP routes.
The following table describes the parameters:
Field
Destination
Delete a selected destination route on the Static Route Table.
Figure 5-34 IP Route Table
Figure 5-35 IPv6 Static Route
Description
Enter the IPv6 address of the destination device.
55
User Manual of FRT-415N