Planet Networking & Communication FRT-415N User Manual page 39

New MAC Address
5.3.2.2 DHCP
Dynamic Host Configuration Protocol (DHCP) allows the individual PC to obtain the TCP/IP configuration from
the centralized DHCP server. You can configure this router as a DHCP server or disable it. The DHCP server
can assign IP address, IP default gateway, and DNS server to DHCP clients. This router can also act as a
surrogate DHCP server (DHCP Relay) where it relays IP address assignment from an actual real DHCP
server to clients. You can enable or disable DHCP server.
 DHCP Server
Click DHCP in the left pane and the page shown in the following figure appears.
click "Apply Changes" to save the new settings.
Enter MAC address and then click Add to add a new MAC address.
Figure 5-18 DHCP
39
User Manual of FRT-415N