Planet Networking & Communication FRT-415N User Manual page 57

The following table describes the parameters:
Field
RIP
Apply
Interface
Recv Version
Send Version
Add
Delete
Description
You can select Off or On.
Click it to save the settings on this page.
Choose the router interface that uses RIP.
Choose the interface version that receives RIP messages. You can
choose RIP1, RIP2, or Both.
 Choose RIP1 to indicate the router receives RIP v1 messages.
 Choose RIP2 to indicate the router receives RIP v2 messages.
 Choose Both to indicate the router receives RIP v1 and RIP v2
messages.
The working mode for sending RIP messages. You can choose RIP1 or
RIP2.
 Choose RIP1 to indicate the router broadcasts RIP1 messages only.
 Choose RIP2 to indicate the router multicasts RIP2 messages only.
Click it to add the RIP interface to the Rip Config List.
Select a row in the Rip Config List and click it to delete the row.
57
User Manual of FRT-415N