Step 3:
Handlebar
1. Run the two hand pulse wires (26)
into the hole in the handle bar
mounting plate and out through the
hole in the console plate.
2. Install the Handle Bar (3) onto the
Upright tube (2) with two 5/16" x
5/8" Hex Head bolts (51), two 5/16"
x 18mm Flat Washers (72) and two
5/16" Split Washers (103) being
careful not to pinch the hand pulse
wires.
•
O w n e r ' s m a n u a l
P L A T I N U M P R O
GB
7