Step 2 - Tunturi 14PTUB2000 User Manual

Front upright tube assembly Front upright tube assembly
1. Unravel the Computer Cable (29) Unravel the Computer Cable (29)
and snake it through the Upright tube and snake it through the Upright tube
Cover (38) and the Upright tube (2) Cover (38) and the Upright tube (2)
until the cable connector comes out until the cable connector comes out
the top opening of the upright tube. the top opening of the upright tube.
Slide the plastic cover (38) onto the Slide the plastic cover (38) onto the
upright tube, ensuring the correct upright tube, ensuring the correct
orientation of the cover. orientation of the cover.
2. Install the Upright tube (2) onto the Install the Upright tube (2) onto the
Main Frame (1) with seven 5/16" x Main Frame (1) with seven 5/16" x
5/8" Hex Head bolts (51), six 5/16" 5/8" Hex Head bolts (51), six 5/16"
x 18mm Flat Washers (72) on the x 18mm Flat Washers (72) on the
side screws and one 5/16" x 19mm side screws and one 5/16" x 19mm
Curved Washer (99) on the front Curved Washer (99) on the front
screw.
6

Step 2:

Step 2: