Installation
3-4 VGA Card Installation
Important: Please read through the instruction below before you
start installing the VGA card.
<Figure 7>
<Figure 8>
<Figure 9>
Page 3-6
To install a single VGA card in Single
Mode, insert the VGA into the "Primary"
VGA slot. (labeled on the board)
In Single mode the "Secondary" VGA
slot will become inactive.
When installing the VGA card, make
sure the card edge connector is fully
inserted into the slot and the clicker is
locked properly.
To install the dual VGA card in SLI
Mode mode, insert into both "Primary"
and "Secondary" VGA slot.