Setting Up Amd A75 Raid Configuration; Setting Up A Bootable Raid Array - ECS A75F-M2 User Manual

Chapter 6

Setting Up AMD A75 RAID Configuration

Setting Up a bootable RAID Array

This section explains how to configure a bootable AMD RAID array.
Setting Up the BIOS
1. Start your computer, then press Delete to enter the BIOS setup.
The BIOS CMOS Setup Utility screen appears.
Main Advanced
BIOS Information
System Language
System Date
System Time
Figure 1.1
2. Use the arrow keys to select Advanced menu (see Figure 1.1), then select SATA
Configuration and press Enter.
Main Advanced
SATA Configuration
Serial-ATA Controller
SATA Mode
SATA Port1
SATA Port2
SATA Port3
SATA Port4
SATA Port5
SATA Port6
Figure 1.2
3. Use the arrow keys to select the SATA Configuration (see Figure 1.2) and globally
set SATA Configuration to RAID.
Setting Up AMD A75 RAID Configuration
Chipset M.I.B III
English
Tue 01/01/2008
16:52:28
BIOS CMOS Setup Utility Main Screen
Chipset M.I.B III
Enabled
IDE
WDC WD5000AAKX (500.1
Not Present
Not Present
Not Present
Not Present
Not Present
SATA Configuration Screen
Boot Security
Choose the system default
language
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Boot Security
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
59
Exit
Exit