Setting Up Amd Sb710 Raid Configuration; Setting Up A Bootable Raid Array - ECS A960M-M3 Manual

Chapter 5

Setting Up AMD SB710 RAID Configuration

Setting Up a bootable RAID Array

This section explains how to configure a bootable AMD RAID array.
Setting Up the BIOS
1. Start your computer, then press Delete to enter the BIOS setup.
The BIOS CMOS Setup Utility screen appears.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset M.I.B.III Boot Security Exit
BIOS Information
System Date
System Time
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Figure 1.1
2. Use the arrow keys to select Advanced menu (see Figure 1.1), then select
SATA Configuration and press Enter.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced
SATA Configuration
Serial-ATA Controller
SATA Mode
PATA Master
PATA Slave
SATA Port1
SATA Port2
SATA Port3
SATA Port4
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Figure 1.2
3. Use the arrow keys to select the SATA Configuration (see Figure 1.2) and
globally set SATA Configuration to RAID.
A960M-M3 USER MANUAL
[Sat 03/10/2012]
[00:06:22]
BIOS CMOS Setup Utility Main Screen
Chipset M.I.B.III Boot Security
[Enhanced]
[IDE Mode]
Not Present
Not Present
Not Present
Not Present
Not Present
INTEL SSDSC2MH (120.0GB
SATA Configuration Screen
Set the date. Use Tab to
Switch between Data eletments.
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Exit
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
53