Power Management Setup - ECS A75F-M2 User Manual

32

Power Management Setup

This page sets up some parameters for system power management operation.
Main
Power Management Setup
Resume By RING
Resume By PME
Resume By USB 1.x/2.0 (S3)
Resume By PS2 KB (S3)
Resume By PS2 MS (S3)
EUP Function
Power LED Type
Resume By RING (Disabled)
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call
on the modem) awakens the system from a soft off state.
Resume By PME (Disabled)
This item specifies whether the system will be awakened from power saving modes
when activity or input signal of the specified hardware peripheral or component is
detected.
Resume By USB 1.x/2.0 (S3) (Disabled)
This item allows you to enable/disable the USB 1.x/2.0 device wakeup function from
S3 mode.
Resume By PS2 KB (S3) (Disabled)
This item enables or disables you to allow keyboard activity to awaken the system
from power saving mode.
Resume By PS2 MS (S3) (Disabled)
This item enables or disables you to allow mouse activity to awaken the system from
power saving mode.
EUP Support (Enabled)
This item allows user to enable or disable EUP support.
Power LED Type (Dual Color LED)
This item shows the type of the Power LED.
Press <Esc> to return to the Advanced Menu page.
Advanced Chipset M.I.B III Boot
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Dual Color LED
Using BIOS
Security Exit
About Resume by Ring
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit