Setting Tones - Accu-Chek Mobile User Manual

Setting tones

In the Tones menu you can turn the beep tones, the beep tone for reminders and the acoustic mode on or
off. The different beep tone settings are as follows:
Beep tones: If Beep tones is turned on, a beep tone sounds during a test,
• when the meter advances a test area to the tip of the cassette,
• when the prompt Apply drop is displayed and you can apply blood or control solution to the test area,
• when the test begins and Test in progress is displayed,
• when the result is displayed,
• when an error message is displayed.
In order to be able to hear the beep tones, the volume must be set between volume levels 2 and 5. If you
have set volume level 1 (Mute), no beep tones are audible. See Setting the volume page 48.
Reminders: If Reminders is turned on, a beep tone sounds for a set reminder (see Setting reminders
page 51).
Acoustic mode: If acoustic mode is turned on, the meter guides you through the blood glucose test using
the previously mentioned beep tones (see Acoustic mode page 89).
Selecting settings
5
49