Retrieving Averages - Accu-Chek Mobile User Manual

Retrieving averages

The meter can calculate averages from the stored test results.
You can choose which test results are used for calculating the averages:
• All results
1
• Only test results that were flagged with Before meal
• Only test results that were flagged with After meal
When you have made this selection, you can choose the period of time in which the test results were
obtained. The last 7, 14, 30 or 90 days.
The average is calculated from all test results that match your selection. However, the following results
are not included in the calculation:
• Control tests (flagged with
• Test results displayed as
Selecting the time period
buttons to switch directly from one time period to the others. The calculated average
together with the number of test results (called Tests) from which the average was calculated 6.
Averages
1
2
3
)
or
only determines which average is displayed first. You can use the
4
Using the meter as a diary
Time periods
2
3
6
4
5
6
is displayed,
5
67