Tools Menu - Accu-Chek Mobile User Manual

Tools menu

On the one hand, the Tools menu offers you some extra means of checking the meter. On the other hand,
you must also use this menu to prepare for cleaning the meter and changing a test cassette that has not
been used up.
The following options are available in the Tools menu:
• Display check: Performs a separate display check
• Validity: Displays the validity of the test cassette
• Change cass.: Prepares the meter for removing a test cassette which still has unused test areas
(for example, when you clean the meter).
Performing a display check
If you want to check whether the display is working properly, you can do so via the display check in the
Tools menu, in addition to the display check after turning the meter on. In this case, the display check is
displayed not only for about 2 seconds, but until you cancel it (1 minute at most).
1
In the Main menu, use
select Tools (
).
Press .
to select Display
to Use
check.
The Display check is displayed.
2
Press .
The meter runs the display check
in which a black and yellow
checkerboard pattern of small
illuminated dots is displayed.
10
Tools menu
3
101