Setting The Time And Date - Accu-Chek Guide Me User Manual

1
Your New System

Setting the Time and Date

1
2
set-up
3
set-up
4
appears. Insert a test strip to perform a
test.
Press and release
to turn the meter on.
The flashing test strip
symbol appears on
the display.
Press and hold
until set‑up appears
on the display. The
hour flashes.
Press or to
decrease or increase
the hour.
Press to set the
hour and move to the
next field.
Repeat steps 2 and 3
to set minutes, am or
pm, month, day, and
year. Press and hold
until the flashing
test strip symbol
NOTE
• The meter prompts you to set the time
and date the first time you turn the
meter on or if an error occurs.
• Press and hold
flashing test strip symbol appears to
perform a test.
• The time and date on the meter
synchronize to the time and date on
the paired device each time the meter
sends data to the paired device.
9
at any time until the