Registering The Handset - VTech VSP601 User Manual

Registering the handset

You can register one VSP601 DECT cordless handset to an ErisTerminal
deskset. When a deskset has a cordless accessory, the deskset and handset are
all part of the same extension, and only one device can be used at a time.
Note: Make sure the handset has a charged battery before proceeding. Also
make sure the deskset is powered on and is idle.
To register the cordless handset:
1. Press MENU on the handset. The Main Menu appears.
2. Press to scroll to User settings and press SELECT.
q
3. Press to scroll to Registration and press SELECT.
q
4. With Handset highlighted, press SELECT. The handset asks
you which device you want to register to. Press
5. The handset screen displays instructions. Press
continue reading the instructions.
6. On the phone, press Menu.
to highlight User Settings, and then press SELECT.
7. Press
q
8. Press to highlight DECT handset, and then press SELECT.
q
The DECT handset menu appears:
DECT handset
9. With Register highlighted, press SELECT on the deskset.
Registering... appears while the deskset searches for the
handset.
10. Press the # key on the handset. The screen shows Please
wait...
The registration process takes up to 10 seconds. When
registration is complete, Registration succeeded appears on
the deskset. The handset displays Handset Registered.
If the handset fails to register, place it in the charger for a few
seconds, remove it and repeat the registration procedure.
Model shown:VSP725
Model shown:VSP735
17
.
DESKSET
to
NEXT