Mixed Size Original - Toshiba e-studio 2802af Fax Manual

2.SENDING A FAX

MIXED SIZE ORIGINAL

Switch Mixed Size Original ON or OFF. When this mode is set to ON, you can mix originals of
different length. The size of the original is automatically determined before the original is
scanned.
* This mode is only available for the equipment with the RADF installed.
Originals of different width are not acceptable.
ECM
Switch the ECM (Error Correction Mode) communication ON or OFF. ECM is an internationally
standardized communication mode that automatically corrects errors that occur during fax
transmissions. With this setting option ON, even when the transmitted data have been affected
by noise during communication, this mode allows good communication without image distortion
by automatically resending the parts that have been affected.
 Both the sender and the receiver must have the ECM function to make ECM
communication available.
 When affected by noise during communication, communication time is slightly longer
than usual. Even when the ECM communication is used, an error may occur depending
on the line status.
 The ECM communication is not available for voice communication.
2 SENDING A FAX
Basic Procedures 35