2 SENDING A FAX
SINGLE/2-SIDED SCAN
You can send a copy of 2-sided originals by fax using the RADF (Reversing Automatic
Document Feeder).
SINGLE:
DUPLEX:
When you place a 2-sided original of the LT/A4 size, change the direction of the original
depending on its bind position as follows:
1. Right-to-left (book-type) original
2. Top-to-bottom (tablet-type) original
1
Note that each setting will automatically return to its default setting when transmission is
completed.
ORIGINAL SIZE
Set the scan size of the original.
AUTO SIZES:
Specified size:
*
With e-STUDIO2809A Series, if the size of an original placed on the original glass cannot be
determined, it is set to LD/A3.
If the recipient's fax machine is not capable of receiving originals of B5 size, this equipment
may reduce that size before sending it. To avoid this, when the original to be set is B5 size,
specify LT/A4 size respectively.
34
Basic Procedures
This is suitable for 1-sided originals.
This is suitable for 2-sided originals.
The size of the original is automatically determined before the original is
scanned.
The original is scanned at the preset size regardless of its actual size.
2