Metabo BE 751 Original Instructions Manual page 14

17027000_0910 B_Bauk10 BE 751 BE 1100.book Seite 14 Mittwoch, 15. September 2010 8:53 08
ENGLISH
ENG
An accurate estimate of the vibratory load should
also take into account the times when the tool is
shut down or when it is running but not actually in
use. This may significantly reduce the vibratory
load over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
A-effective perceived sound levels:
L = Sound pressure level
pA
L = Acoustic power level
WA
K , K = Uncertainty (sound level)
pA WA
Wear ear protectors!
Measured values determined in conformity with
EN 60745.
Machine in protection class II
* Energy-rich, high-frequency interference can
cause fluctuations in speed. The fluctuations
disappear, however, as soon as the interference
fades away.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
14