Setting Up Http Communication - Canon i-SENSYS LBP6670dn User Manual

Setting Up HTTP Communication

In order to use MEAP functions from the Web browser, HTTP communication must be enabled.
Follow the steps in the procedure below to configure the settings. (The default settings are [On].)
1
Press [ ] (
After the message is displayed, press [OK].
2
Select [TCP/IP Settings] with [
3
Select [HTTP] with [
4
Select [On] with [
[On]
[Off]
5
Hard reset or restart the printer.
Downloaded from ManualsPrinter.com Manuals
: Settings), select [Network] with [
] and [
] and [ ], and then press [OK].
] and [ ], and then press [OK].
It uses HTTP.
It does not use HTTP.
] and [
], and then press [OK].
04L9-0F7
], and then press [OK].