The Printer Is Not Recognized Automatically - Canon i-SENSYS LBP6670dn User Manual

The Printer Is Not Recognized Automatically

Perform one of the following solutions according to the cause.
<Cause 1> The printer is not turned ON.
Solution Turn the printer ON.
<Cause 2> The USB cable is not connected properly.
Make sure that the printer and computer are properly connected with the USB cable.
Solution
"Connecting to a Computer"
<Cause 3> The USB cable was already connected and the printer was turned ON before the
printer driver was installed.
Perform the following procedure.
Solution
<Cause 4> An inappropriate USB cable is being used.
Use a USB cable that is appropriate for the USB interface environment of the printer and has the following
symbol.
Solution
The following is the USB interface environment of this printer.
<Cause 5> The USB class driver is installed.
Uninstall the USB class driver.
For details, see the following item in "Printer Driver Installation Guide."
Solution
"Appendix" - "If You Cannot Install a USB Class Driver"
For details on the procedure for viewing "Printer Driver Installation Guide", see "Installation."
Downloaded from ManualsPrinter.com Manuals
1. Turn the printer OFF.
2. Disconnect the USB cable.
3. Connect the USB cable again.
4. While the following screen appears, turn the printer ON.
Hi-Speed USB
USB
04L9-0JS