Canon i-SENSYS LBP6670dn User Manual page 729

[Remote Address]
When [IPv4 Manual Settings]/[IPv6 Manual Settings] is selected
Enter the IP address in the [Addresses to Set Manually] field.
You can enter the IP address in the following way.
IP Address Entry
Example
192.168.0.1-
192.168.0.10
fe80::1000-
fe80::2000
192.168.0.0/16
fe80::0000/64
6
Set [Port Settings].
The packets setting the security policy are specified as follows.
[Local Port]
[Remote Port]
If you want to select all ports
Select the [All Ports] check box.
If you want to select a single port
Downloaded from ManualsPrinter.com Manuals
here
Packets with "destination IP addresses" that match IP addresses specified
TX
here
If you want to enter the IP addresses of consecutive numbers, place "-" (hyphen) between the
address of the smallest number and that of the largest number.
In order to specify the subnet range (prefix length), enter a "/" (slash) after the normal IP
address symbol, and then enter another prefix length (maximum 32 for IPv4 and maximum 128
for IPv6).
Transmission
RX Packets with "destination ports" that match IP addresses specified here
TX Packets with "departure ports" that match IP addresses specified here
RX Packets with "departure ports" that match IP addresses specified here
TX Packets with "destination ports" that match IP addresses specified here
IP Address Entry Method
Packets Applying the Security Policy