Performing The Configuration Using The Printer's Control Panel (The Settings To Be Performed First) - Canon i-SENSYS LBP6670dn User Manual

Performing the Configuration Using the Printer's Control Panel (the
Settings to Be Performed First)
When configuring the spooler function using the printer's control panel, use the following menu hierarchy.
Pressing [
indicates that the procedure is performed by pressing [
indicates that the procedure is performed by pressing [OK] on the control panel.
IMPORTANT
After performing the configuration
To enable the settings, perform a hard reset or restart the printer.
For details on a hard reset, see
To go back up the hierarchy
Press [ ] ( : Back).
About the control panel
For details on the control panel, see
1
Press [ ] (
When the message is displayed, press [OK].
You can specify the settings when the printer is either online (the
(Online) indicator is off).
2
Select [Spooler] using [
3
Specify the setting for the spooler function using [
4
Downloaded from ManualsPrinter.com Manuals
] ( : Settings) displays the common Setup menu.
"Canceling All the Jobs (Hard
"Control Panel."
: Settings), select [Network] using [
] and [ ], and then press [OK].
] or [ ] on the control panel.
Reset)."
] and [ ], and then press [OK].
(Online) indicator is on) or offline (the
] and [ ], and then press [OK].
04L9-07X