Toshiba Satellite E200 Maintenance Manual page 167

4.8 HDD
Installing the HDD
Install the HDD according to the following procedures and Figures 4-10, 4-11.
CAUTION: To avoid damage, always hold the HDD only by its sides.
1. Attach the HDD chassis.
2. Secure the HDD and its chassis with the four M3x4 black head screws.
CAUTION: To prevent the HDD bracket from being distorted when installing the HDD
pack into the computer, do not press the center of the HDD pack. Always hold the HDD
pack by its sides.
3. Install the HDD pack into the correct position in the computer. Connect the HDD
pack to the computer, holding the HDD pack by its sides.
4. Insert the HDD pack.
5. Secure the HDD pack with two M2x3 black flat head screws.
Satellite/E200/E205
Downloaded from LpManual.com Manuals
Maintenance Manual
4 Replacement Procedures
4-25