Toshiba Satellite E200 Maintenance Manual page 183

4.14 Speakers
Installing the Speakers
Install the speakers according to the following procedures and Figure 4-25.
1. Seat the left and right speaker in the correct position.
2. Route the speaker cable in the wire guide.
3. Secure the left speaker with two M2x3 black flat head step screws.
4. Secure the right speaker with two M2x3 black flat head step screws.
5. Connect the speaker cable to CN9801 on the audio board.
6. Seat the left and right speaker in the correct position.
7. Seat the shield in the correct position.
8. Secure the shield with five M2x3 black flat head screws and two M2x2.5 black flat
head screws.
Satellite/E200/E205
Downloaded from LpManual.com Manuals
Maintenance Manual
4 Replacement Procedures
4-41