Error Codes - Olympus MJU 300 Basic Manual

basic_e_opx_6.fm Page 40 Thursday, December 12, 2002 10:44 AM
Monitor
indication
NO CARD
CARD ERROR
WRITE-
En
PROTECT
CARD FULL
NO PICTURE
PICTURE ERROR
CARD%SEtUP
POWER%OFF
FORMAt
SELECt GO
CARD COVER
OPEN
Y/M/D
40 En

ERROR CODES

Possible cause
The card is not
inserted, or it cannot
be recognized.
There is a problem with
the card.
Writing to the card is
prohibited.
The card is full. No
more pictures can be
taken or no more
information such as
print reservation can
be recorded.
There are no pictures
on the card.
There is a problem with
the selected picture
and it cannot be
displayed.
The card is not
formatted.
The card cover is
open.
The date and time are
not set.
Corrective action
Insert a card or insert a different card.
Wipe the gold contacts with a
commercially available cleaning
paper and insert the card again. If the
problem persists, format the card. If
the card cannot be formatted, it
cannot be used.
Use a different card.
Insert a new card.
Read-only has been set using a
computer. Use the computer again
to cancel the read-only setting.
Replace the card or erase
unwanted pictures. Before erasing,
download important images to a
PC.
The card contains no pictures.
Record pictures.
Use image processing software to
view the picture on a PC. If that
cannot be done, the image file is
damaged.
Format the card.
Close the card cover.
Set the date and time.