Basic Fax Operation
This section contains basic information of fax transmission.
d
Sending a Fax Using the ADF
If the ADF is used, original documents containing multiple pages can be
automatically scanned.
d
d
d
d
1
Press the Fax key to enter Fax mode.
d
2
Make sure that there is no document on the original glass.
3-2
Downloaded From ManualsPrinter.com Manuals
Documents with the following paper sizes can be faxed.
–
When using the original glass
Document size: A5/A4/Statement/Letter
–
When using the ADF
Width: 140 to 216 mm
Length: 148 to 500 mm
Do not load original documents that are bound together, for example,
with paper clips or staples.
Do not load more than 35 sheets; otherwise an original document
misfeed or damage to the document or machine may occur.
If the original document is not loaded correctly, it may not be fed in
straight, or an original document misfeed or damage to the document
may occur.
Do not open the ADF cover while documents loaded into the ADF are
being scanned.
If the initial mode ([UTILITY] - [MACHINE SETTING] - [INITIAL
MODE]) is set to [FAX], this step can be skipped.
Basic Fax Operation